Houston Docks

Thousands of satisfied customers
Local and family owned
+15 years in business
Licensed and insured
Always FREE Quotes

Licensed & Insured Dock Builder in Lake Conroe, TX

For more than 15 years, we’ve planned, permitted, and built safe, long‑lasting docks and boathouses on Lake Conroe. Houston Docks is family‑owned, fully insured, and experienced with SJRA rules, HOA/POA approvals, and 2023 NEC waterfront electrical requirements. From new construction to storm damage rebuilds, we do it right the first time.

If you’re searching for Dock Builder Lake Conroe TX, we understand lake levels, wake action, and shoreline erosion unique to this waterway. We design with durable materials and proven methods so your dock, lift, and bulkhead stand up season after season. Reach out today for a fast, no‑pressure, free estimate and site visit.

Lake Conroe Dock Construction, Lifts, and Bulkheads

We design, permit, and build high‑quality waterfront structures tailored to Lake Conroe conditions. Our team focuses on durability, safety, and value—using proven materials and methods that meet SJRA rules and current electrical codes.

Dock Construction

Your dock should handle fluctuating lake levels, heavy foot traffic, and boat wakes. We install pilings with a pile driver barge and vibratory hammer, use .60 CCA pressure‑treated southern yellow pine or composite decking (Trex, TimberTech, WearDeck), and through‑bolt with galvanized/stainless hardware. Cross‑bracing, hurricane straps, and HDPE pile sleeves resist movement and corrosion. Expect clean lines, proper deck board spacing, and a stable platform you’ll trust for decades. Learn more about our Dock Construction services.

Custom Dock Design

Every shoreline is different. We model wind, wake exposure, and the lake’s normal pool (201 ft msl) to recommend fixed or floating layouts, gangway slopes, and slip sizes. Our designs integrate LED marine lighting, power pedestals, and safe routing for conductors with bonding and GFPE/GFCI protection per NEC 555. Need a fishing pier, swim platform, or ADA‑friendly gangway and handrails? We’ll plan it, permit it, and build it to code. Learn more about our Custom Dock Design services.

Boat & Jet Ski Lift Installation

Protect your investment with the right lift for your boat or PWC. We install cable, hydraulic, and platform lifts sized for your vessel and slip. As manufacturer‑trained installers (HydroHoist, ShoreMaster, Golden Boat Lifts), we set proper piling spacing, cradle alignment, and electrical with ABYC‑informed practices. We also add PWC ports and jet ski lifts for quick, one‑person launching. Learn more about our Boat & Jet Ski Lift Installation services.

Bulkhead Installation

Stop shoreline loss and protect your property value. We install vinyl/PVC sheet piling with deadman/tie‑backs, geotextile filter fabric, riprap stone, and concrete caps for a crisp, durable edge. Where conditions call for it, we use steel sheet piling with cathodic protection. Our crews work from a barge to minimize yard disturbance and deliver straight, level walls that handle waves and boat wakes. Learn more about our Bulkhead Installation services.

Dock Repair

From storm damage to aging deck boards, we restore safety and extend service life. We replace rotten caps, stringers, and decking, correct sagging gangways, upgrade fasteners to stainless, and add new cross‑bracing. Electrical issues? We test with a leakage‑current meter per NEC 555.35 and bring your system up to GFPE/GFCI standards. Re‑deck in composite for a low‑maintenance refresh that looks great and lasts. Learn more about our Dock Repair services.

Other Services We Offer

Why Homeowners Choose Houston Docks for Lake Conroe Projects

Houston Docks brings 15+ years of experience, thousands of completed projects around Greater Houston, and deep knowledge of Lake Conroe standards. We manage design, permits, construction, and electrical in‑house to keep your project on time and code‑compliant. When you need a proven Dock Builder Lake Conroe TX can rely on, we deliver durable results and responsive service—backed by clear communication and written warranties.

Permits, Compliance, and Electrical Safety

We streamline approvals with the SJRA for residential docks, boathouses, and bulkheads. Our team prepares drawings, site plans, and specs that align with SJRA rules and subdivision ACC requirements for communities like Walden, Bentwater, April Sound, Seven Coves, and Point Aquarius. For projects involving fill or dredge, we coordinate with USACE Section 404 when applicable and guide you through each step.

Electrical safety is non‑negotiable. We design and install power to boat lifts and receptacles in accordance with the 2023 NEC Article 555, ABYC marine electrical best practices, and NFPA 303. That includes GFPE/GFCI protection, bonding/grounding, proper wiring methods, signage to warn about shock hazards, and leakage‑current testing (NEC 555.35). Our work is led by a TDLR‑licensed electrical team and inspected to the current code cycle.

Over‑water safety is enforced on site. Crews follow OSHA 29 CFR 1926.106—life jackets, ring buoys, and rescue skiff—plus documented job hazard analyses. You get a safer jobsite and a higher‑quality result.

Built for Lake Conroe Conditions

We design around Lake Conroe’s normal pool at 201 ft msl and the seasonal lowering to roughly 199–200 ft. That means setting deck elevations, gangway slopes, and lift ranges so your equipment remains usable and protected as levels fluctuate. We also account for wake action in high‑traffic corridors near the Highway 105 bridge and busy marinas.

Structural details matter. We drive pilings deep and add cross‑bracing and hurricane straps to resist racking. Fasteners are hot‑dip galvanized or stainless. Where steel is used, we incorporate corrosion control and can provide cathodic protection. Shorelines are stabilized with vinyl/PVC sheet piling, deadman tie‑backs, geotextile, and riprap stone. The result is a quiet, solid dock that feels secure underfoot.

Equipment, Materials, and Craftsmanship

We bring a pile driver barge, jetting pumps, vibratory hammers, and a barge‑mounted crane/excavator—so we set pilings straight and to refusal. Laser levels keep caps true; portable load testing verifies capacity where required. For decking, we offer Trex, TimberTech, and WearDeck composites, Ipe hardwood, or .60 CCA pine to suit your budget and maintenance goals.

We protect your investment with HDPE pile sleeves and UV caps, thru‑flow grated panels where ventilation or splash‑through is beneficial, aluminum gangways with non‑skid treads, and LED marine‑rated lighting. Every connection is through‑bolted with the correct washers and locknuts to prevent loosening. It’s the small choices that add up to a longer‑lasting dock.

Transparent Process, Warranties, and Support

You’ll receive a detailed written proposal that spells out scope, materials, hardware, and timeline—no surprises. We stand behind our craftsmanship with clear warranties and offer annual inspections and maintenance plans to keep lifts, fasteners, and electrical in top condition.

Case in point: In April 2024, we rebuilt a storm‑damaged slip in Walden—replaced 35 linear feet of timber bulkhead with vinyl, added a 7,000‑lb platform lift, and re‑decked in WearDeck. The project passed SJRA inspections on the first visit and was completed in 16 working days, start to finish.

HOA/ACC Guidance and Subdivision Experience

From Walden on Lake Conroe and Bentwater to April Sound and Grand Harbor, we prepare ACC submittals that satisfy subdivision guidelines the first time. We provide drawings, color samples, and spec sheets for lifts, roofing, lighting, and finishes—speeding approvals and reducing back‑and‑forth. If dredging under a lift is required, we’ll advise on permits and seasonal scheduling to minimize downtime.

Dock Services Across Greater Houston and Lake Conroe

Houston Docks proudly serves residential and commercial clients across Greater Houston with fast, reliable scheduling. If you’re within about 30 miles of the Lake Conroe area, we’ve likely worked in your neighborhood. Our local crews know the water, marinas, and permitting offices, so we can mobilize quickly and build to local standards.

Serving All Neighborhoods in Lake Conroe

We work throughout 77356, 77318, 77304, 77316, and 77303—covering Walden on Lake Conroe, Bentwater, April Sound, Seven Coves, Point Aquarius, Grand Harbor, Cape Conroe, Lake Conroe Hills, Corinthian Point, Harbor Point, and the Waterpoint area. We also service Walden Marina, Waterpoint Marina, Palms Marina, and Stow‑A‑Way Marina.

Our team understands SJRA rules, HOA/POA approvals, wake conditions near the FM 1097 bridge, and how the 201 ft msl pool and seasonal lowering impact lift ranges and gangways. When you need a trusted dock builder Lake Conroe for design‑build or repairs, we’re ready to help.

Other locations we serve near Lake Conroe

Frequently Asked Questions

Do I need an SJRA permit to build a dock on Lake Conroe?

Yes. The SJRA requires a residential license and construction permit for docks, boathouses, and bulkheads on Lake Conroe. We handle the application, drawings, site plan, and coordination with inspections. If your project also needs HOA/POA Architectural Control Committee approval (Walden, Bentwater, April Sound, etc.), we prepare those submittals too. For projects involving fill or dredging, we advise on any USACE Section 404 requirements.

How much does it cost to build a boat dock in Texas?

Costs vary by size, structure type (fixed vs. floating), decking material, and water depth. On Lake Conroe, many residential docks fall between $35–$85 per square foot, with boathouses, lifts, lighting, and bulkheads adding to the total. After a site visit, we provide a line‑item proposal showing materials (e.g., WearDeck, Trex, TimberTech), piling counts, hardware, and electrical so you can compare options with confidence.

What is the normal water level of Lake Conroe?

Lake Conroe’s normal pool is 201 feet msl. Seasonally, the SJRA may lower the lake to roughly 199–200 feet for flood mitigation. We set deck elevations, gangway slopes, and lift ranges to remain usable through those changes. That planning prevents stuck lifts, steep gangways, and flooded decking during heavy rain or high‑wind events.

Are floating docks allowed on Lake Conroe?

Yes, floating docks are permitted when designed and anchored per SJRA rules. We’ll evaluate wind and wake exposure, recommend helical/screw anchors or guide piles, and design gangways that maintain safe slopes across seasonal lake levels. In some shorelines, a fixed piling dock may be better. We’ll compare options during your free estimate.

Which dock materials last longest on Texas lakes?

Composite decking (WearDeck, Trex, TimberTech) offers excellent longevity and low maintenance. Ipe hardwood is very durable but heavier and typically higher in cost. Structure and hardware matter too: .60 CCA treated pine framing, stainless/galvanized fasteners, HDPE pile sleeves, and UV caps extend service life. We’ll match materials to your budget, use, and aesthetic goals.

How long does it take to build a dock on Lake Conroe?

Most residential projects take 2–4 weeks of on‑water construction after permits and materials are ready. The full timeline depends on SJRA and HOA approvals, weather, and scope (e.g., adding a boathouse, lift, or bulkhead). We’ll provide a clear schedule with milestones—mobilization, pile driving, framing, decking, lift installation, and electrical—before work begins.

What electrical code applies to boat lifts and dock power?

Dock electrical falls under the 2023 NEC Article 555. We install GFPE/GFCI protection, proper bonding and grounding, correct wiring methods, and shock‑hazard signage. Our team tests for leakage current per NEC 555.35 and follows ABYC and NFPA 303 best practices. A TDLR‑licensed electrical team oversees the work for safety and compliance.

Do HOAs like Walden, Bentwater, and April Sound require ACC approval?

Yes. Most subdivisions around Lake Conroe require ACC approval for docks, boathouses, lifts, roofing, and bulkheads. We prepare the packet: plans, elevations, materials, colors, lift specifications, and lighting details. Familiarity with local guidelines helps reduce revisions and speed approvals so construction can begin sooner.

How does SJRA’s seasonal lake lowering affect dock and lift design?

Seasonal lowering to about 199–200 ft msl changes gangway slopes and lift travel. We set deck heights and specify lift ranges so boarding remains safe and equipment stays operational during lower water. For some sites, we recommend floating sections or adjustable gangways to maintain usability across fluctuating levels.

Can I replace a timber bulkhead with vinyl/PVC sheet piling on Lake Conroe?

Yes. Vinyl/PVC sheet piling with deadman/tie‑backs, geotextile fabric, and a concrete cap is a popular upgrade from aging timber. Pros include longer life, reduced maintenance, and a clean appearance. In higher‑energy shorelines, we may add riprap for energy dissipation. We’ll review SJRA requirements, provide profiles, and price out options during your estimate.